Stay Safe on the Road; The Best Commuter Bike Helmets

Introduction

It sounds obvious to say it, but wearing a bicycle helmet is crucial. According to the Department of Transportation, 857 cyclists were killed in 2018. You have to wonder how many of these cyclists weren’t wearing protective gear.

Wearing a helmet can save you from so many injuries. In the worst cases, just wearing a bicycle helmet could save you from a fatal injury. We always promote wearing safety gear for this very reason. And not only bike helmets.

We’re going to go over what you need to look for when shopping for a commuter bike helmet. Then we’ll list some of the best commuter bike helmets out there to choose from.

What to Look for in a Commuter Bike Helmet

The first thing we want to point out is that before you purchase any bike helmet, make sure there’s a Consumer Product Safety Committee sticker. These stickers are usually placed on the inside of the helmet.

Helmets with these stickers have been tested time after time. They’ve been tested for how they’ll hold up in a serious impact.

But what else can you look for in a commuter bike helmet?

Commuter Bike Helmet Fit

The fit of a commuter bike helmet is the most important aspect of finding the right helmet. If it doesn’t fit right, it can’t protect you right.

The best way to find the right fit is to measure the size of your head. You can do this easily with a sewing measuring tape. You need to find the circumference of your head.

For most brands, the sizes start off at extra small. These are for heads that are smaller than 20 inches. The size small fits those with a circumference between 20 inches and 21.75 inches.

The next size is a medium. It’s for heads between 21.75 inches and 23.25 inches. Large is for heads with circumferences between 23.25 inches to 24.75 inches. Extra-large is for those with heads larger than 24.75 inches.

There are “one size fits all” bike helmets. These helmets are adjustable.

If your commuter bike helmet fits correctly, it should fit snugly on your head when the chin strap is adjusted. It also needs to sit low on your forehead, an inch or so above your eyebrows.

We prefer bike helmets with tightening mechanisms in the back of the helmet. These straps tighten the inner shell around the back of your head.

If you have long hair, consider a helmet with a hair port. A hair port is where you can pull a ponytail through. This way your ponytail doesn’t change the fit or tightness of the helmet.

Since brand sizes can differ and the shape of the helmet can change things up, always try a helmet on before you purchase it.

Other Safety Features

Rotational forces can also cause serious head injuries. So, it’s important that your commuter bike helmet can protect you from these types of injuries as well.

To protect from rotational forces, some brands use a Multi-directional Impact Protection System, also known as MIPS. These helmets have a low friction layer on the inside of the helmet.

The low friction layer works to redirect the rotational effect. This means it reduces the movement of the outer shell when you crash. As it does this, the foam lining of the helmet is able to take on the impact so your head doesn’t.

Another type of technology used to protect against rotational forces is Shearing Pads Inside or SPIN. These helmets have pads filled with silicone. These pads work to redirect rotational force as well.

A third common type of technology is WaveCel. These special helmets have a honeycombed liner. This liner absorbs all impact, including rotational force.

When it comes to safety, you should also consider the vents in a bike helmet. One reason for vents is to increase wind flow over your head.

But they also cut down on the contact between your head and helmet. A commuter bike helmet with more vents is always a plus.

A bright helmet can also be helpful. Bike helmets that are bright (or even neon) colors are easily seen by other riders or even drivers. It makes you easier to avoid if they come across you in the road.

In a hurry?

Best Pick

Stay Safe on the Road - The Best Commuter Bike Helmets

OUR TOP PICK

Giro Agilis MIPS Adult Road Cycling Helmet

The Giro Agilis MIPS Adult Road Bike Helmet uses Roc Lic 5 fit technology. This makes the helmet fit snugly and comfortably on your head. It’s super easy to adjust the vertical position of the helmet as well as the tension.

It has a polycarbonate in-mold construction. This is a lightweight material. You won’t feel weighed down while wearing this commuter bike helmet. Despite being lightweight, it’s still heavy-duty enough to protect you.

It has an EPS liner. The helmet uses cool-fit anti-microbial padding.

It uses 32 Wind Tunnel technology with internal channeling. It pulls in cool wind and pushes out hot air to keep your head cool while biking.

The helmet uses the Multi-Directional Impact Protection System to protect your noggin. It helps redirect rotational force so it doesn’t cause any invisible damage.

PRODUCT 2

Bell Stratus MIPS Adult Road Bike Helmet

The Bell Stratus MIPS Adult Road Bike Helmet uses Float Fit technology to ensure comfort while you’re wearing this helmet. It has a streamline fit.

The Float Fit technology also uses a rubber over-molded dial for adjustments.

It’s a lightweight polycarbonate shell. You don’t have to worry about added weight to your body while cycling. The inside has EPS liner. The quick-adjust fasteners help fit the helmet to your head in a proper position.

The helmet also has a Sweat Guide. The Sweat Guide prevents sweat from rolling into your eyes while biking.

It also has Over-brow Ventilation that helps pull in cool air. Then the ventilation pushes the air through an air channel matrix. This is so you don’t overheat on your bike ride. It has a total of 18 vents.

The bike helmet uses the Multi-directional Impact Protection System to protect your head from rotational force. It helps redirect the force in an accident.

It includes reflective decals. These decals ensure that others on the road see you clearly.

PRODUCT 3

Smith Optics Signal MIPS Cycling Helmet

The Smith Optics Signal MIPS Cycling Helmet uses Smith’s VaporFit fit system. It’s going to feel like it fits to your head perfectly. And if it doesn’t, it’s easily adjustable so it does.

The inner shell has performance comfort lining. It also has an ultra-light single layer of webbing.

It uses the AirEvac ventilation system. It makes for 21 vents. This ventilation system takes in cool air while pushing out hot air. It reduces the likelihood that you’re going to overheat.

The commuter bike helmet uses the Multi-Directional Impact Protection System. It protects your head from invisible damage from rotational force during an impact.

For further safety, Smith uses precise thermal welding process. This makes the helmet heavy-duty. In an impact, the core decelerates the energy.

It even has eyewear storage.

PRODUCT 4

Giro Syntax MIPS Adult Road Cycling Helmet

The Giro Syntax MIPS Adult Road Cycling Helmet is very comfortable. It uses the Roc Loc 5 fit system. With the right size, it’ll fit perfectly and comfortably on your head. Plus, you can adjust it as needed.

It sits a little bit above your head. This is so air can flow over your head while you’re cycling down the road.

The shell is made from an in-mold polycarbonate material. This makes for a lightweight helmet that doesn’t weigh you down. It has an EPS liner.

The commuter bike helmet uses 25 Wind Tunnel vents with internal channeling. This improves your aerodynamics. It also reduces overheating by pulling in cool air and pushing out hot air.

It uses the Multi-directional Impact Protection System to keep you safe. It redirects rotational force if you crash.

PRODUCT 5

Thousand Adult Anti-Theft Bike Helmet

The Thousand Adult Anti-Theft Bike Helmet uses its own PopLock technology. It has a hidden channel behind the logo on the side. You only have to pop the logo out. You can pull your bike chain right through the channel so you can lock it up as well.

It uses a Dual Fit system. It will fit your head snugly as well as comfortably. You can adjust it just right with a dial.

There are seven air vents and three cooling channels. Your head is going to stay cool on long bike rides.

The road bike has microfiber vegan straps. It won’t absorb your sweat while at the same time being cruelty free. The buckles to the strap are magnetic. It connects it easily and securely.

PRODUCT 5

 

Giro Cinder MIPS Adult Road Cycling Helmet

The Giro Cinder MIPS Adult Road Cycling Helmet is super comfortable. You can adjust the vertical position and tension thanks to the Roc Loc 5 fit system.

The Roc Loc 5 fit system also suspends the bike helmet a little off the top of your head. This is so air can flow over your head.

The helmet uses Air-FX padding. This padding ensures your head stays comfortable even during long bike rides.

It has an in-mold polycarbonate construction that makes it lightweight. You’ll barely feel the helmet on your head while cycling. It has an EPS liner.

It has 26 Wind Tunnel vents to improve aerodynamics and help cut down the impact on your head during a crash.

This commuter bike helmet uses the Multi-directional Impact Protection System. This redirects rotational force during impact.

It has a hair port for anyone with long hair. You can pull your ponytail right through the hair port so it doesn’t affect the fit.

PRODUCT 5

 

Lazer Z1 Lightweight Road Bike Helmet

The Lazer Z1 Lightweight Road Bike Helmet has the ARS fit system. It’s super comfortable and doesn’t squeeze your pressure points to death. The retention system uses a thumb-wheel and a nylon band. It makes the pressure even all around your head.

The helmet also has an adjustable head-basket. The head-basket allows you five different positions. You’ll find your comfort zone in no time with this helmet.

It has a polycarbonate in-mold construction. It’s a tough helmet but it’s also ultra-lightweight. You won’t feel weighed down by this commuter bike helmet.

This helmet has 31 vents with deep channeling. These vents help keep your head cool during long and sweaty bike rides. It makes sure hot air doesn’t seep in. The airflow of this helmet is impressive overall.

The T-Pro design brings added protection for your head. It adds extra material around your temples.

It has a nifty hair port for those who have long hair. You can pull your ponytail through the hair port. This way it doesn’t affect the way the commuter bike helmet sits on your head.

It even has magnet eyewear docking.

PRODUCT 6

 

Bern Hudson MIPS Bike Helmet

The Bern Hudson MIPS Bike Helmet uses the Compass Fit system for a perfect fit. You only have to twist a dial on the back of the helmet to get the right fit.

It uses in-mold construction. It’s a super lightweight, weighing in at less than a pound. You’re not going to feel this helmet while wearing it.

There are 13 different vents. These vents improve cool air flow so you stay cool instead of overheating on a hot bike ride.

The vents on the back of the helmet allow you to pull a U-lock through it. This way you can lock up your bike helmet along with your bike.

It has a custom integrated LED rear light. You can charge it by a micro-USB. It gives you up to 10 hours of visibility to other bikers and drivers. There are three different settings including: steady, flash, and pulse. It’s also water-resistant so you don’t have to worry about water damage if it rains.

The commuter bike helmet uses the Multi-Directional Impact Protection System. It makes sure to redirect energy if you’re involved in an accident that causes rotational force. It’s going to keep your head safe.

PRODUCT 7

 

Abus Urban-1 Bike Helmet

The Abus Urban-1 Bike Helmet has the Zoom Evo Easy fit system. With a little adjustment, you’ll have a comfortable and safe fit. It uses soft magnetic straps to adjust the helmet under your chin.

It uses in-mold construction. This creates a super durable commuter bike helmet that isn’t going to crumble on you. It’s going to take on any shock you encounter on impact.

The design is also lightweight. It’s almost weightless on your head while you’re on a long bike ride.

On the inside of the helmet is a removable padding. This is so you can easily remove it to clean it as needed. That way bacteria from sweat doesn’t build up causing odor.

It also has a mesh liner. This mesh liner sits in the front to keep bugs from flying inside the bike helmet.

It has 12 inlet vents and five outlet vents. It pulls in all that cool air while pushing out all that stale hot air. This prevents you from overheating.

The bike helmet has an integrated LED rear light. It gives 180-degrees visibility. Anyone who comes across you at night is going to see you. Plus, there are large reflectors.

The visor is removable. If you don’t want it on, you can easily remove it before you head out.

PRODUCT 8

 

Bell Annex MIPS Commuter Adult Bike Helmet

The Bell Annex MIPS Commuter Adult Bike Helmet has Float Fit technology for a comfy fit. It has a rubber dial to adjust it so it fits perfectly to your head.

It’s lightweight. It won’t feel like you’re wearing much of anything when wearing this special bike helmet.

The outer shell is made from a fusion in-mold polycarbonate material. It’s a heavy-duty helmet with an EPS liner.

The inner shell not only has EPS liner but is woven with real silver fibers. These fibers stop the growth of bacteria and fungi. This not only prevents plain grossness but odor as well.

The straps are quick-adjust. It doesn’t take much effort to adjust them to your face. Plus, the straps lay flat no matter what.

The bike helmet has Over-brow Ventilation. The Over-brow Ventilation pulls in cool air and pushes out hot air through an air channel matrix.

There are even slider open buttons that allow you to open and close the vents. You get complete control on how much airflow the helmet has.

It has a reflective coating. This means cars can see you in low light so they can avoid you if you’re biking on the road.

The helmet uses the Multi-Directional Impact Protection System. It redirects rotational force to protect your head from invisible injuries during impact.

It has a removable light mount with a reflective housing.

PRODUCT 9

 

POC Omne Air Spin Bike Helmet

The POC Omne Air Spin Bike Helmet is adjustable so it fits your head well. It’s a 360-degree fit adjustment dial making this adjustment super easy.

The outer shell is made from a polycarbonate material. The impact foam on the inside is EPS. Plus, it has thick core protection zones.

It has great ventilation channels. These ventilation channels ensure that your head stays cool and doesn’t overheat.

For protection, POC uses its Shearing Pads Inside or SPIN technology. SPIN inserts the pads with silicone. This protects you from injuries due to rotational force when you’re in an accident.

PRODUCT 10

 

Kask Valegro Bike Helmet

The Kask Valegro Bike Helmet uses rubber Octo Fit Micro Dial Adjusters. You can adjust it to fit your head perfectly. You’ll be comfortable and protected.

The bike helmet uses MIT technology. MIT technology uses a polycarbonate shell. This combined with the in-mold construction makes sure the helmet absorbs the shock instead of your head.

The design oscillates freely up to 180-degrees. This shapes perfectly to any head. Plus, the cradle has skeletal brackets. The brackets also conform around your head and provides stability.

On the inside of the helmet is internal gel pads. This creates even more comfort when you’re wearing the helmet.

Also on the inside of the helmet uses 3D dry padding. This padding uses a multi-layer open cell construction. It keeps your head dry no matter how much you sweat during your long bike ride.

The inside is also anti-static and fights against bacteria thanks to the Resistex Carbon.

 It has a total of 37 ventilation holes. It makes sure it pulls in cool air while pushing out hot air. You’ll never overheat with this bike helmet on.

PRODUCT 11

 

Kask Valegro Bike Helmet

The Giro Aether Spherical MIPS Adult Road Bike Helmet has an open design to improve air circulation. It uses Roc Loc 5 fit technology with three-way fit tuning. You can adjust the helmet so it can fit you perfectly without being uncomfortable.

It has a ball-and-socket design. The shell is made from six-piece polycarbonate. Polycarbonate is such a lightweight material that you don’t feel much at all when wearing it. But it’s still tough enough to protect your head.

The inner shell of the commuter bike helmet has progressive layering. It uses dual-density EPS foam liner. This special liner works as extra padding and protection in an accident.

It also has a second layer of foam. This is a lower density EPP foam with rebound characteristics.

The bike helmet has 21 Wind Tunnel vents with internal channeling. It pulls in cool air and pushes out hot air. This is a great system for ventilation to prevent you from overheating.

It uses an advanced version of the Multi-Directional Impact Protection System to redirect any rotational force you endure. It eliminates the plastic slip plane that the original MIPS technology uses. This technology is protecting your brain from any harm.

The helmet even has eyewear docking ports. It uses rubber grippers to hold onto your eyeglasses or sunglasses while cycling.

Conclusion

Commuter bike helmets are necessary. You can’t get around it. You never know if you’re going to end up in a serious accident. It happens more than you would think.

But you don’t want any old bike helmet. You want a bike helmet that’s truly going to protect you from all types of head injuries, including those that happen due to rotational force. That’s why we created this list of the best commuter bike helmets.



Enter your text here...

Leave a Comment

Your email address will not be published. Required fields are marked *